Matt ppgi Fantin Galvanized Karfe Coil Matte RAL8017 RAL7016

Matt ppgi Prepainted Galvanized Steel Coil Matte RAL8017 RAL7016 Featured Image

Takaitaccen Bayani:

Matt ppgi shi ne acronym don farantin galvanized karfe, yana amfani da galvanized azaman substrate.Bayan saman pretreatment (sunadarai degenreasing da sinadaran hira magani), da surface mai rufi da Layer ko dama yadudduka na shafi, ta hanyar yin burodi da kuma curing, sa'an nan ya zama PPGI.

Fim ɗin fenti wanda za mu iya yin 10-30microns.Mafi girman fim ɗin fenti, tsawon rayuwar sabis na launi.

Aika mana imel

Cikakken Bayani

Tags samfurin

Nau'in Rufaffen Karfe Na Karfe

1. Babban fenti: PVDF, HDP, SMP, PE, PU

2.Primer Paint: Polyerethane, Epoxy, PE

Paint na baya: Epoxy, Polyester da aka gyara

prepainted coil coating

Aikace-aikace

Ppgi Galvanized Coils suna da amfani da yawa, misali
Masana'antar gine-gine: aikace-aikace na waje: rufin rufin, tsarin rufin, mirgina masu rufewa, kiosks, masu rufewa, kofofin gadi, dakunan jiran titi, bututun samun iska, da sauransu.
Na'urorin lantarki: firiji, na'urorin sanyaya iska, murhu na lantarki, bawon injin wanki, murhun mai da sauransu.
Masana'antar sufuri: rufin mota, fale-falen baya, hoardings, harsashi na mota, tarakta, manyan kantunan jirgi, da sauransu.
Koyaya, an fi amfani da tarurrukan tsarin ƙarfe, taron bita na allo, da masana'antar tayal ɗin ƙarfe mai launi.

EWT

Kauri	0.12mm-1.5mm, (11ma'auni-36ma'auni, ko bisa ga abokin ciniki ta bukata)
Nisa	750mm-1250mm (ko bisa ga abokin ciniki ta bukata)
Daidaitawa	GBT2518-2008, ASTM A653, JIS G3302, EN 10142, da dai sauransu
Matsayin kayan abu	SGCC/SGCH/CS Nau'in A da B/DX51D/DX52D/G550/S280/S350 ETC.
Tufafin Zinc	Z30-Z275g
Daidaitaccen launi	Lambar RAL azaman buƙatar abokin ciniki
Tufafi	Babban shafi: 5-30UM
Tufafi	Rufe baya: 5-15UM
Base karfe	Galvanized Karfe
Maganin saman	Passivation ko Chromated, Fatar Fata, Mai ko Ba'a, ko Buga Antifinger
Nauyin nada	3-5 ton ko a matsayin abokin ciniki ta bukata
Diamita na ciki	508/610mm ko kamar yadda kuke bukata

Kunshin
Daidaitaccen marufin fitarwa na teku: 3 yadudduka na shiryawa.

Fim ɗin filastik a farkon Layer, Layer na biyu shine takarda Kraft.Layer na uku an kare takardar galvanized+kunshin tsiri+kusurwa.

FAQ
Q: Kuna samar da samfurin?
A: Ee, muna ba da samfurin.Samfurin kyauta ne, mai isar da sako na duniya ne ke kula da shi.

Kudin jigilar kaya zai dawo muku da zarar mun hada kai.

Q: Kuna karɓar dubawar ɓangare na uku?
A: Ee, mun yarda da duba na ɓangare na uku.
Q: Menene lokacin bayarwa?
A: Gabaɗaya 25-35days.
Tambaya: Kuna da hannun jari?
A: Don samfurin haja, da fatan za a tuntuɓe mu don tabbatarwa.